Hardware Kit for combining two standard hex Mega-Couplers into a Swivel Coupler.
Hardware is easily removable to change the swivel back into two Mega-Couplers.
Part Number:
MLSM-XL-RKIT
90 Degree plate and hardware kit for combining two standard hex Mega-Couplers into a 90 Degree Coupler.
Hardware is easily removable to change the 90 Degree Coupler back into two Mega-Couplers.
Part Number:
ML9M-XL-RKIT
Two standard hex Mega-Couplers combined into a 90 Degree Coupler using the hardware kit.
Mega-Coupler Bolt Assembly
Black
Part Number:
ML-SBA-B
Mega-Coupler Bolt Assembly
Silver
Part Number:
ML-SBA-M
Mega-Coupler Bolt Assembly
with Steel Wingnut
Part Number:
ML-SBA-SW
Mega-Coupler Bolt Assembly with Nylock Nut
Part Number:
ML-SBA-NN
Spirol Pin
Locks Swivels into a stationary 90 Degree Position
Part Number:
PS.219X2-ZP
Set of Hardware for Mega-Coupler with 1/2" Hex Head Cap Screw
12 Each:
Nylock Nut
Belleville Washer
1.25" Long Hex Head Cap Screw
Part Number:
ML-HWP
Set of Hardware for Mega-Coupler with 1/2" Flat Head Bolt
12 Each:
Nylock Nut
Belleville Washer
1.5" Long Bolt
Part Number:
ML-HWP1/2CS
Set of Hardware for Mega-Coupler with 3/8" Hex Head Bolt
24 Each:
Nylock Nut
Belleville Washer
1" Bolt
Part Number:
ML-HWP3/8HEX
Set of Hardware for Mega-Coupler with 3/8" Flat Head Bolt
24 Each:
Nylock Nut
Belleville Washer
1.5" Long Bolt
Part Number:
ML-HWP3/8CS
Nylock Nut for Mega-Couplers with 1/2" Hardware
Part Number:
NN.5-13-8ZP
Nylock Nut for Mega Couplers with 3/8" Hardware
Part Number:
NN.375-16-5ZP
Belleville Washer for Mega-Coupler with 1/2" Hardware
Part Number:
WB1-.515X.063-EN
Belleville Washer for Mega-Coupler with 3/8" Hardware
Part Number:
WB.875-.390X.063-EN
1/2" Hex Head Cap Screw for Mega-Coupler
Part Number:
HC.5-13X1.25-8-ZY
3/8" Hex Head Cap Screw for Mega-Coupler
Part Number:
HC.375-16X1-5-ZP
1/2" Flat Head Bolt
1.5" Long
Part Number:
SF.5-13X1.50APL
3/8" Flat Head Bolt for Countersunk Mega-Coupler (1.5" Long)
Part Number:
SF.375-16X1.5-APL
1/2" Flat Head Bolt for Countersunk Mega-Coupler
2" Long
Part Number:
SF.5-13x2.00-APL
1/2" Flat Head Stainless Steel Bolt
2" Long
Part Number:
SF.5-13x2.00-SS
Metric M-12 Bolt for 1/2" Countersunk Mega-Coupler
Part Number:
SF M12X40MM-APL
Metric Nylock Nut M-12 for 1/2" Countersunk Mega-Coupler
Part Number:
NN-M12-8ZP
Metric M-10 Bolt for 3/8" Countersunk Mega-Coupler
Part Number:
SF M10X40MM-APL
Metric M-10 Nylock Nut for 3/8" Countersunk Mega-Coupler
Part Number:
NN-M10-8ZP
The Light Source Wing Nut
Can be used for OEM products.
Replacement wing nuts for the Mega-Coupler require the
bolt and wing nut assembly.
Black
Part Number:
ML-M-NB
The Light Source Wing Nut
Can be used for OEM products.
Replacement wing nuts for the Mega-Coupler require the
bolt and wing nut assembly.
Black
Part Number:
ML-M-N
BOLT ASSEMBLIES
Mega-Coupler Bolt Assemblies include the Mega-Coupler swivel bolt, a 1/2" SAE washer, and a 1/2" nut. Also available in stainless steel.
HARDWARE PACKS
Sets of bolts, nylock nuts and Belleville Washers.
Packs for 1/2" Mega-Couplers include 12 sets.
Packs for 3/8" Mega-Couplers include 24 sets.
SPIROL PIN
The spirol pin locks a Mega Swivel Coupler into a 90 degree position.
METRIC
Countersunk Mega-Couplers can be converted to metric using metric bolts and nuts.
The M-12 fits the 1/2" Countersunk Mega-Coupler.
The M-10 fits the 3/8" Countersunk Mega-Coupler.
WING NUTS
The Light Source wing nuts are available for OEM products. They cannot be used as a replacement nut on the Mega-Coupler since the wing nuts are permanently attached to the bolt to prevent loss. To replace a wing nut, the bolt and wing nut assembly must be used.
- Case Quantities
- Each