Mega-Coupler Pipe Adapter
Aluminum Finish
Part Number:
MP1.5B.5M
Mega-Coupler Pipe Adapter
Black Anodized
Part Number:
MP1.5B.5B
Two Interlocking tabs keep the adapter from rotating.
There is a 1/4-20 set screw to lock the pipe rotation, and an inspection hole to verify that the pipe is fully inserted
The Black Mega-Coupler Pipe Adapter is shown attached to a black Mega-Claw. (The Mega-Claw is not included and must be purchased separately.)
The silver Mega-Coupler Pipe Adapter is shown attached to a Quad Coupler 1.5. (The Quad Coupler 1.5 is not included and must be purchased separately.)
The Pipe to Coupler Adapter can be used to rig pipe-mounted plasma screens, projectors and speakers from overhead pipe or truss. The Pipe to Coupler Adapter attaches a standard threaded NPT 1-1/2" pipe (1.9" OD) to a Mega-Coupler. There are two interlocking tabs to keep the adapter from rotating. The Adapter is fastened to the Mega-Coupler with the 1/2"-13 tpi by 1-1/4" long bolt and Nylock nut that comes with the Mega-Coupler (not included). There is a 1/4-20 set screw to lock the pipe rotation, and an inspection hole to verify that the pipe is fully inserted.
The Mega-Coupler Pipe Adapter can also be used on a Mega-Claw.
- Working Load Limit
- 1100 Pounds
- Hardware
- 1/4" x .375 Socket Set Screw
- Weight
- 0.8 oz.
- Case Quantities
- each